What We Offer
We offer a range of services to meet the needs of every client. Have something else in mind? We'd be happy to work with you to create a custom quote.
-
The Glasshaus way is to keep control of everything to guarantee the highest quality and strict control of deadlines.
Extrusions All the case designs are unique to us and we design each profile in house. We then get the aluminum extrusions supplied in bulk so that we carry an extensive stock of the profiles
Hinges The hinges made in-house to our own design. Whenever there is any slack, we build a new batch so we always have them ready for each project
Glass After being let down on a regular basis by glass processing companies, we invested heavily in glass processing equipment. We now buy the glass in bulk direct from the manufacturers and carry large stock of 3 meter x 2 meter sheets at all times. We then cut, polish and drill all our glass in-house. This ensures deadlines are in our own control and any mistakes, breakages, or client variations can be swiftly resolved.
Materials All our materials are conservation grade and off the British Museum Oddy testing list
-
Got a world-famous trophy that needs a case? Discovered a priceless artefact that requires specific environmental conditions? Or looking for a completely bespoke curved glass display case? Our designers will find the right solution.
Over many years we have been involved in a wide diversity of projects, from small temporary exhibitions to the complete redevelopment of major national museums and often there is a requirement for a completely bespoke solution. Our advantage here is that we manufacture everything ourselves so we can weld steel frames, or aluminium, create glass bonded structures, or we can outsource specialist products such as bespoke lighting solutions or curved glass.
Our designers enjoy creating new solutions, whether a variation on an existing design, or a solution from scratch if required. It keeps the creative juices flowing!
Often when testing a bespoke solution, we will print the parts on our 3D printer first. A project might have an unusual access requirement, higher than normal security needs or fit with a particular existing style. Our extremely skilled team and our high level of in-house manufacture means that we can accommodate almost any request.
-
As sustainability become more and more everyones responsibility, we realise that refurbishing existing display cases is going to become increasingly common.
With our mutidisciplined approach to everything we do, it means that we are the leaders in breathing new life into your existing cases. This might be for a number of reasons, including, budget, historical significance of the cases, or a responsibility to sustainability.
Within our core team we have the skills and experiance to do this and have many examples of previous projects where this has been a great success.
We can survey and create a report stating the work required and can get old cases up to current museum conservation standards. This usually involves the following.
· Refreshing exterior finishes – metal or timber
· Sealing all gaps & leaks.
· Fitting new seals
· Sealing all off-gassing materials
· Improving security and locks
· Changing lighting
· Changing dress panels
· Introducing new humidity controls
-
Humidity
Artefacts are usually damaged by the fluctuation of humidity. The process of absorbing moisture and then drying out throughout the day, month or seasons. The job of a display case is to buffer those changes and keep a constant set relative humidity. This is usually done with silica gel. The main advantage of a low air exchange rate is that you need smaller volumes of silica gel. We can advise on types of buffers and quantity of silica gel required.Air Exchange Rates (AER)
Low air exchange rates such as 0.1 require an almost perfect seal and can be affected by invisible gaps. That’s why we leak test all our cases as standard whilst installing them. We’ve also sent members of our team on training courses so that we understand the effects of the design on air pressure and flow. We can advise on the shapes & sizes that will naturally achieve the best results.
We do in-house air exchange testing and can provide our clients with reports if required. As the tests are usually taken over a 24hr period, its sometimes cost effective for us to train the client on the correct use of the testing equipment and loan them the kit for a week. We can issue both the reports and the raw data so that they can be independently verified if needed.
As well as being able to prove the air exchange rates to our clients, we also recognise the importance of this in our research and development. We train all our staff from the designers to the workshop team about the implications of air exchange rates, relative humidity and conservation of artefacts so that the cases are built with this in mind.
-
Unlike many other case manufacturers, we are not just trying to push our own designs. We aim to build lasting relationships and provide a full service. On many occasions, we have been asked to relocate an existing set of cases from one gallery to another. We have invested in a set of material lifters that can literally pick up and transport large cases with dismantling. On other occasions, we have stripped a case down, re-installed it and re-furbished it at the same time.
If you have cases from different manufacturers that needs moving, give us a ring and we can come out to discuss the individual needs and approaches
-
Please contact hello@glasshausdisplays.co.uk for a quote on your project.
I addition to this, we are happy to give free budgeting advice when you are in the early stages of planning a project. With so many options and different styles, it can be a minefield when setting a PC budget for a project. Let us help you with this. While we understand that there is no guarantee of winning the work, it gives us a way of offering a mutually beneficial service that helps us build long term relationships and trust.
We also have our designers specification guide on the Products page that can be used to set the budget parameters and even drawings that can be downloaded and used for funding applications
-
Our approach to project management is to keep it simple. We manufacture everything in-house including the glass processing so we don’t have multiple sub-contractors to deal with and can concentrate on our clients.
We combine the project manager and designer role for two main reasons.
1) Our clients have a sole point of contact that can answer all questions and have authority to make key decisions
2) Our Project managers know every detail of your project inside out.
To make things even better, they receive on-going including Agile Project Management training / solid works training and are all required to work on site as part of the install team for a minimum period of 1 week every year to keep up to date with practical issues faced on site.
Supported by the managing director Graham and Business manager Mike, they also work closely with workshop manager Matt who coordinates the manufacture and resources across all projects.
We believe that this unique approach means that we can offer an un-rivalled service.
-
Unlike many case manufacturers, we have our own joinery and spray finishing department. We don’t get involved in setworks, but we are more than happy to build the case plinths, or any complicated item that needs to integrate intimately with them. This can be an advantage for fit-out companies using our services. We are happy to fully integrate our designs with a fit-out contractor or fabricate certain elements in-house for them. For example, where there are mechanics that are housed in a plinth and have to be fitted before going to site.
We also build our own object plinths and carry out the fabric wrapping.
Below are an example of brass clad plinths made as part of the display case package for Manchester Museum. We also made the fabric wrapped interior plinths.
Let’s Work Together
If you're interested in working with us, complete the form with a few details about your project. We'll review your message and get back to you within 48 hours.

